"We Install Peace Of Mind"

Call Us Today!
(203) 729-2266

Category: Masonry Services

Understanding the Process of Masonry Restoration and What It Entails

Masonry Repair And Replacement

Masonry restoration and repair can be a difficult process at the best of times. You’ll need to hire experts who specialize in it and who can provide you with the best services in your area. Aside from that, even understanding the process itself can be a bit tricky, but you will have to learn as much as you can about it, if you want to make an informed decision regarding who to hire for the job.


The term “masonry restoration” refers to the work performed on any and all types of masonry that exists within a building or a home. If the masonry requires renewal or repair, a masonry restoration expert will usually be called in to assess the damage, determine the best method with which to proceed, and provide the owner of the building or house with an estimate on how much the work will cost.


The object of masonry restoration is to make a building look as good as new or even better than it was when it was new. Since many buildings that require this service are quite old, and since the materials used and the approach to masonry that masons use today will be quite different than those 50 or even 20 years ago, the process of masonry restoration will also differ.


Typically, however, the mason will use methods such as repointing – which is the process of replacing some or all of the mortar used for a certain joint – and various types of upgrades to ensure that the building can withstand an earthquake, a fire or a certain degree of water damage better than before.

The Major Signs That Your Masonry Has Been Damaged by Hail

Damage Signs To Look For After Hailstorm

Hail is a major concern for a number of areas around the exterior of your home. Aside from affecting gardens and roofs, hail can also fall at an angle and damage the side of your home. If you own brittle masonry that can easily be damaged, and there are no trees to block the hail’s falling trajectory, then it should be pretty easy to spot the signs that your masonry has been damaged by hail and in need of a Connecticut masonry repair:


  • The first signs you’ll see will be visible ones. Masonry and brick veneer as well as similar types of siding, can be chipped, pitted and even cracked during a hail storm, leading to the need for replacing certain parts of the masonry or even the restructuring of an entire wall.
  • Hail damage signs become clearer when you observe the direction of the wind during or right after a hail storm. If the wind and the perceived trajectory of the hail matches the impact signs on your home’s exterior walls, then any chips, dents and cracks you might find were likely created by the hail’s impact.
  • Some types of masonry can also lose some of its color in certain areas as a result of hail exposure. Because of the impact of smaller pieces in a denser formation on your walls, the strength of the individual impacts might not be enough to damage the masonry, but it might be enough to discolor it.

Increasing The Longevity Of Your Historic Building

Maintaining Historic Buildings

The main advantages of consolidating a building are the substantial reduction of seismic risk and the increase of its longevity. A historic building has a great architectural value, which must be preserved.

Consolidation works vary from one building to another, depending on age, damage, and materials from which it was built. Older buildings generally have a resistance structure made from load-bearing masonry, which means that the gravitational and seismic forces are taken over by the walls. As such, damage that occurs over time varies from cracks to crushed walls. The most common solution for such problems would be to consolidate the walls by covering them with reinforced concrete, on one or both sides.

However, in the case of historically important buildings, this consolidation method is not recommended because the shape, size and materials used in the original construction must be preserved. The consolidation of a historic building involves the restoration of the cracked wall, which leads to finding the best Connecticut masonry local expert, the injection of cracks and the insertion of mortar into the wall.

Before making the decision to consolidate and restore a historic building, you need to call on specialists to assess the construction and determine the best solutions. You also need to get the necessary permits.

Why Masonry Is Rising In Popularity

Masonry Home Construction

The advantages of building with masonry are visible to anyone, not just to construction specialists.

The first advantage of the load bearing masonry houses is that they resist very well in the case of seismic movements. Any construction company can tell you that due to the mosaic-type construction, the structure is much more resistant, and the mortar between the bricks only adds to the overall strength of the building. Obviously, an analysis of the structure has to be performed at certain intervals, because the mortar may shrink or lose its consistency over time, in which case consolidation works will be needed.

Another advantage worth taking into account when it comes to the masonry is that these types of constructions manage to provide good thermal insulation. It does not mean that a masonry construction will no longer require the installation of insulation, but it does have the property of retaining heat much better than other materials, such as concrete or wood, and masonry restoration experts agree.

Masonry is also rising in popularity because it is a very durable option and has a long life span; testimonies are the thousands of constructions built over time. Additionally, masonry buildings are very resistant to fire and also provide good sound insulation.

What to Do If Your Building Is Missing Bricks

Tips For Masonry Repair

Damaged brickwork or a wall that is missing bricks needs immediate attention, but fortunately, the repair can be easily tackled by DIY repair enthusiasts as well. Here is how to do it:

  • Find suitable bricks – you will need bricks that match the rest of the wall in shape, size and color. If you have some in your attic, you are lucky, but don’t despair if you don’t – most hardware stores carry large inventories of bricks;
  • Grab a bucket, fill it with water and soak the replacement brick in the water for about an hour;
  • Clean the gap – use a chisel to remove the old mortar or remaining pieces of the old brick;
  • Make the mortar – mix a small amount following the instructions on the packaging;
  • Spray some water on the bricks around the hole to prevent them from drying out your mortar too quickly;
  • Spread a generous layer of mortar on the bottom of the hole, then take the replacement brick out of the bucket and apply mortar on all the edges except the bottom that will come attached to the already mortared surface;
  • Place the brick into the hole and press it downward, then align the brick and remove the access mortar.

If you are not up to the task, call a professional masonry restoration Connecticut contractor to do the work for you, for wonderful results.