Want to buy a new flat roof for your building? Commercial roofing contractors can offer you some of the best types of roofing for New England, that will help you save money as well as purchasing a high quality roof that will last for decades. Here are a few of your best choices:

• EPDM roofing is a type of resilient rubber roof that is very easy to install, repair and maintain. It is one of the longest lasting flat roofing systems, with a projected lifespan of about 40 to 50 years.
• Metal roofing systems are low-maintenance and just about equally as durable as EPDM. Moreover, metal systems are highly energy efficient, able to offer good insulation and completely fireproof. They’re also great for withstanding hail, wind and storms better than most other types of flat roofing.
• Built-up roofing tends to fare better in warmer climate, but it’s still used in areas like New England on occasion. That is primarily because of its relatively long lifespan of up to 30 years and the fact that it’s seamless and requires very simple installation steps.
• TPO roofing is quite possibly the most popular type of roofing available. TPO is practical and easy to install, and its level of resilience is quite impressive as well. A good alternative to rubber and PVC, this impressive single-ply roof is great for energy efficiency and preventing storm damage. Talk with a professional commercial roofing company in your area at http://www.nemasonry.com/new-england-roofing to get all the latest and greatest in roofing products.

The older the roof, the more careful you have to be whenever you hire a roofer to get it fixed. The biggest risk, as your roof ages, is that the next big storm could end up damaging it to such an extent that it can no longer be repairable. The result will be that you’ll need to have it replaced, and that’s not always a practical or a cheap solution.

Maintenance for flat roofs can be used to extend the lifespan of your roof quite a bit. Through proper maintenance, you can find damage and problems that are not yet serious, but that can degenerate in time into situations that require costly repairs or a complete roof replacement.

So, what type of commercial roofing Connecticut maintenance to consider? First of all, make sure to get a professional roofer to inspect your roof at least twice every year. Secondly, you have to clean your roof regularly and keep up with problems you might detect either on your own or with the help of a roofer. These may include mild pooling, small leaks observed on the ceilings of your building’s top floor, damage that is visible from the ground and a temperature that is above normal.

All of these issues can be indications that your roof needs tending to. If your roof is too old, you might even have to replace it, but it’s good practice to ask for the opinion of a professional roofer before you actually make that decision.

Historic buildings usually refer to buildings which are more than 50 years old and which have an architectural or cultural importance. Restoring such a building can be a challenge not only for the contractors who do the work per-se, but also for architects, conservators or engineers.

In order for a historic stone building to keep on being relevant in our modern times, upgrades and changes are certainly necessary. With the help of thoughtful and relevant building restoration project, a stone building can keep its integrity for many decades to come.

Therefore, it is important for those involved in the restoration process to get familiar with various materials and their properties, as well as how they perform in the long run. These materials usually include brick, terra cotta, cast stone, concrete block, and mortar. For the typical building, mortar takes about 20% of the wall system.

With the masonry wall systems there are also other integrated elements which can be made of steel or iron, such as flashings, sealants, metal ties, and so on.

No matter the chosen materials for the restoration, the basic principle is that these new materials will be the sacrificial ones, not the original materials. It is important also to work with manufacturers in order to find the best options.

Spray foam roofing refers to a special kind of material that is sprayed on the base structure of a roof under the form of liquid, and which further spreads like a foam, thus creating a strong layer over a pre-existent roof.

The main reason why this material is used is to refresh and sometimes fix an already existing roof. This is done by removing the saturated areas and putting new ones in their place. SPF is not the most known type of roofing material, but certainly has been around for a long time, ever since the early ‘60s. Spray foam is used for commercial, residential and industrial buildings.

SPF works well in mostly any climate, and, if properly installed and maintained in a good state, can last for more than 50 years.

This material is produced by mixing two very reactive chemical substances, namely polyol/resin and isocyanate. These two are pumped from different reservoirs to an inner mixing spray gun.

SPF has a high R-value, which means it is highly resistant to heat. This means it can help you save money on energy bills.

Some great news about SPF roofs is that they are renewable. Moreover, many manufacturers extend warranties with every re-coating. Check with your local commercial roofing company at Http://www.nemasonry.com/new-england-roofing for commercial roofing products and services.

EPDM roofing is made with a type of synthetic rubber. Because it is very durable and flexible, it can offer a wide variety of applications, and it can be used also on vehicles. This type of roof offers a lot in terms of versatility, because of its combinations.

EPDM is at the same time elastic and viscous. It gets its name from the chemicals which are mixed together to form this material: ethylene, diene and propylene.

In fact, EPDM roofing refers to several different types of roofing. The single layer of membrane is used together with vapor barriers and thermal insulation that commercial roofing Connecticut companies use.

While rubber has been used for a very long time, its synthetic versions have begun to appear in the 20^th century. Nevertheless, they are in continuous development and will certainly have a lot to say in the future also.

Pond liners are a good example of successful use of the EPDM type of roofing. Apart from the fact that there are pre-assembled liners which can last for a very long time, their installation can be incredibly simple.

Moreover, EPDM can provide waterproofing for balconies, terraces, facades, etc. At the same time, this option is very useful for those who plan on installing solar panels.