Built-up roofing, often referred to simply as BUR, is a type of membrane roof that consists of alternating layers of bitumen and fabrics for reinforcement. In most cases, the construction of a built-up roof starts with fastening a bottommost base sheet on the deck, but built-up roofs can be constructed without the base layer as well.

The bitumen most commonly used in built-up roofs is asphalt, cold-applied adhesive or tar, while the fabrics used between the layers of bitumen are usually made from roofing felt reinforced with organic or glass-fiber mats. During the building procedure, the bitumen is heated in some sort of tanker, then it is applied on the roof surface with the help of a mechanical spreader device, such as a mop. Each layer of bitumen is followed by a layer of felt until the desired thickness is achieved, after which the roof is covered in some sort of finishing material, such as gravel or mineral granules for improving the durability of the roof.

When purchasing a new BUR, there are two types of warranties that you need to consider: the manufacturer’s warranty that covers material defects and the warranty offered by the commercial roofing CT technician who performs the installation on the labor. When the roofing project is complete, it is recommended to obtain both documents.

Deciding whether the roofing on your business building can still be repaired or it needs to be replaced is no easy task. If you have been facing roofing issues for a while now, but you don’t know how severe the roof damage is, here are a few clues that you can rely on for the decision:

• The frequency of leaks – leaks are the most common signs of roof damage, but quite often they are easy to fix. However, if you need to repair the same roof area over and over again and the leak just seems to come back after each rainy period, you probably need to start saving for at least a partial roof replacement;
• Mold and moss on the roof – the appearance of moss and mold on the roof surface is also a sign that water has penetrated inside the roofing structure and is forcing its way through. If the roof is very seriously affected, repair might not be possible;
• Debris falling off the roof – debris on the ground in the area that immediately surrounds the building is a sign of very serious damage that probably requires at least partial roof replacement.

The best way to determine whether the damage sustained by your roof is still repairable is to call a professional commercial roofing Connecticut contractor and to hire him for an inspection and for a discussion about the best way to proceed.

Connecticut is one of the oldest places in the United States where colonists have settled just a few hundred years after Columbus’ discovery of North America. It’s known for expert building restoration projects.  The churches built here as well as many of the other buildings in the area include some of the oldest constructions known in modern US history, and they were built at a time when the founding of the United States of America was still almost 150 years away.

Probably the oldest surviving stone building in the state of Connecticut is an American Colonial house that has been in the New England Museum since 1899. This house was built in the same year as when construction started for the Stratford Historical Society museum – 1639.

Construction for the Loomis Homestead began just a year later, in 1640; while the Thomas Wheeler House and the Comfort Starr House came shortly afterwards, in 1644 and 1645. Although most of the oldest surviving houses and buildings in Connecticut are made of stone, there are rare exceptions, and the Loomis Homestead is one of them. It is, in fact, the oldest wooden house in the state.

Many of these buildings have been renovated and redesigned throughout the years. The best example is the Stratford Historical Society museum, which received a makeover as early as the 1700s, with many Georgian modifications that still stand today.

When it comes to getting the results you want in terms of the longevity of your roofing system, preventive roof maintenance can be extremely important. What it does is to give you a chance to avoid  long term damage by addressing any roofing problems in time. So, if your roof has a small and almost undetectable leak, the preventive roof maintenance methods you employ will discover it, and you can then solve it before any real damage is done.

Preventive roof maintenance should also involve not only an accurate means of detecting problems by inspecting your roof. It should also involve actual techniques through which you – or the roofing experts you call – can work on preventing damage from even happening in the first place.

Adding some coating and replacing cracked shingles should be part of it. Also, it’s important to get rid of any branches and debris that might have fallen on top of your roof, and to fix damaged gutters. The gutter system has to be kept clean to prevent ice dams from forming in the winter, and you should also get a set of gutter guards to further protect your gutters from any pests and stray debris.

There aren’t any limits to the creative measures you can employ for the purpose of preventive roof maintenance. The best approach, however, should be a personalized one, from http://www.nemasonry.com/new-england-roofing, applied to the specific needs of your own home.

There is a lot to be said about natural slate tiles. While it’s not the cheapest of materials to consider for a new roof, slate certainly delivers when it comes to appeal and quality. So let’s just take a quick look at some of its most impressive qualities.

A slate roof is basically the pinnacle of what the roofing industry has to offer. You can get a lot for your money, and the roof will practically not age for the first few decades, which is saying something when compared to other types of roofing. Most natural slate roofs can survive without needing too much work for at least five decades, and with proper maintenance they won’t need replacing for well over 100 years.

Aside from their durability, slate roofing systems are exceedingly beautiful and diverse. You can buy slate shingle tiles that come in all shapes, sizes and colors, and many of the colors and designs available are completely unique and extremely appealing.  They are usually used for residential roofing, rather than commercial roofing CT projects.  However they can be used for any type of building that is structured to hold the weight.

Finally, since they’re made from natural stone, slate tiles don’t give off any VOCs. They also don’t lose their color over time, so you don’t have to paint them, which further takes VOCs out of the picture, since no toxin-infused paint will be needed.

Slate is quite possible one of the best choices you can spend money on when comparing it to other  roofing materials. Its durability, beauty and natural appeal makes it easily one of the industry’s top products.